LabVIEW TS-2000 Controller
I created this application to control my transceiver when operating on the AO40 satellite. There are 4 tabbed GUI screens; "Main" does the frequency conversion so I know my frequency on the downlink. The blue bar shows my relative position within the transponder pass-band. I can save three frequencies and jump back to them later. "Functions" allows me to control and monitor most of the TS-2000's transmit and receive settings without having to deal with the transceiver's front panel. The "Spectrum" and "Settings" show the two-step process used to locate the middle beacon and determine the frequency conversion.